Link speeds are quoted in bits per second while files are measured in bytes. This calculator converts both and allows for protocol overhead.
How to use this calculator
- Enter the data size and pick its unit (GB, GiB…).
- Enter the link speed (Mbit/s, Gbit/s…).
- Set the efficiency — 85–95 % is typical for TCP over Ethernet.
Formula
t = size (bits) / (rate × efficiency)Worked example
10 GB over 100 Mbit/s at 90 %: 10 × 8000 / 90 = 889 s ≈ 14.8 minutes.
Frequently asked questions
GB or GiB?
GB = 10⁹ bytes (drive makers, networks); GiB = 2³⁰ bytes (many operating systems). A "500 GB" drive shows as about 465 GiB.
Why is my download slower than the link speed?
Protocol overhead, Wi-Fi conditions, the server and other traffic all reduce real throughput.
Results are for learning and preliminary design. Check critical work against the relevant codes and a qualified engineer.