Skip to content

Free guides, courses & tools across 12 engineering disciplines

Nuclear & radiation

Radiation Dose, Distance & Shielding Calculator

Inverse-square dose rate, half-value-layer shielding and total dose over time.

Nuclear

Loading calculator…

Time, distance and shielding are the three ways to cut radiation dose. Doubling the distance from a point source quarters the dose rate.

How to use this calculator

  1. Enter a measured dose rate and the distance it was measured at.
  2. Enter the new distance.
  3. Optionally add a shield (its half-value layer and thickness) and the time spent.

Formula

D2 = D1 × (d1/d2)², shielded = D × 2^(−x / HVL)

Point source, narrow-beam shielding without build-up. Typical HVLs: lead 6.5 mm (Cs-137) / 12 mm (Co-60); concrete 48 mm / 62 mm. For estimates only — not a substitute for a radiation protection assessment.

Worked example

100 µSv/h at 1 m becomes 11.1 µSv/h at 3 m; behind two half-value layers, 2.8 µSv/h.

Frequently asked questions

Does the inverse-square law always apply?

Only at distances larger than the source size, and for point sources in air. Close to large sources it overestimates the drop.

What is a half-value layer?

The thickness of material that halves the dose rate. It depends on both the material and the radiation energy.

Results are for learning and preliminary design. Check critical work against the relevant codes and a qualified engineer.