Skip to content

Free guides, courses & tools across 12 engineering disciplines

Fluids & thermal

Pipe Pressure Drop Calculator (Darcy–Weisbach)

Pressure loss, head loss, velocity and friction factor in a straight pipe.

MechanicalCivilChemical

Loading calculator…

Friction makes pressure fall along a pipe. The Darcy–Weisbach equation with the Swamee–Jain friction factor covers laminar and turbulent flow in water, air and other fluids.

How to use this calculator

  1. Choose the fluid (or enter density and viscosity).
  2. Enter the flow rate, inside diameter and pipe length.
  3. Choose the pipe material for its roughness.

Formula

Δp = f × (L/D) × ρv²/2, f (turbulent, Swamee–Jain) = 0.25 / [log10(ε/3.7D + 5.74/Re^0.9)]², f (laminar) = 64/Re

Straight pipe only. Add fittings as equivalent lengths. The turbulent formula is also used in the 2300–4000 transition range, where real values are uncertain.

Worked example

2 L/s of water at 20 °C in 100 m of 50 mm commercial steel pipe: v = 1.02 m/s, Re ≈ 51 000, f ≈ 0.023, Δp ≈ 24 kPa (2.5 m head).

Frequently asked questions

Darcy or Fanning friction factor?

This uses the Darcy factor, which is four times the Fanning factor.

How accurate is Swamee–Jain?

Within about 1 % of the Colebrook equation for 5000 < Re < 10⁸ and typical roughness.

Results are for learning and preliminary design. Check critical work against the relevant codes and a qualified engineer.