Through-hole resistors show their value with coloured bands: two or three digit bands, a multiplier, a tolerance band and, on 6-band parts, a temperature coefficient.
How to use this calculator
- Choose 4, 5 or 6 bands.
- Pick the colours from left to right — the tolerance band (often gold or silver) is on the right and is usually set a little apart.
- Or switch to "Value → colours" to get the bands for a resistance.
Formula
R = digits × 10^multiplierWorked example
Yellow – violet – red – gold = 4 7 × 100 = 4.7 kΩ ±5 %, so the real value is between 4.465 kΩ and 4.935 kΩ.
Frequently asked questions
Which end do I start reading from?
Start at the band closest to a lead. Gold and silver are never first, so if one end has gold or silver, it is the right-hand end.
What does a 6th band mean?
It is the temperature coefficient in ppm/K — how much the value drifts per degree. Brown is 100 ppm/K, red 50 ppm/K.
Results are for learning and preliminary design. Check critical work against the relevant codes and a qualified engineer.