Skip to content

Free guides, courses & tools across 12 engineering disciplines

Mechanics & materials

Gear Ratio Calculator

Ratio, output speed and torque of a gear pair.

Mechanical

Loading calculator…

A gear pair trades speed for torque. The ratio of tooth counts sets how much — this works for chain sprockets and toothed belts too.

How to use this calculator

  1. Enter the tooth counts of the driving and driven gears.
  2. Enter the input speed and, optionally, the input torque.
  3. Set the efficiency — about 98 % per spur gear stage.

Formula

i = z2 / z1, n2 = n1 / i, T2 = T1 × i × η

Worked example

A 20-tooth pinion driving a 60-tooth gear: ratio 3 : 1, 1500 rpm in → 500 rpm out, and 10 N·m in → 29.4 N·m out at 98 %.

Frequently asked questions

Does the output turn the other way?

Yes for two external gears. Add an idler gear, or use an internal (ring) gear, to keep the same direction.

Does an idler gear change the ratio?

No. An idler only changes direction; the ratio is still last gear ÷ first gear.

Results are for learning and preliminary design. Check critical work against the relevant codes and a qualified engineer.