Materials grow when heated. Long pipes, rails, bridges and façades need joints sized for this movement — or they build up large stresses.
How to use this calculator
- Choose a material (or enter α and E).
- Enter the length and the temperature change.
- Read the expansion and the stress if both ends were fixed.
Formula
ΔL = α × L × ΔT, σ (restrained) = E × α × ΔTWorked example
10 m of steel heated by 40 °C grows 12 × 10⁻⁶ × 10 × 40 = 4.8 mm; fully restrained it would see 96 MPa.
Frequently asked questions
Why do steel and concrete work together?
Their expansion coefficients are almost equal (about 12 × 10⁻⁶ /K), so reinforced concrete does not crack apart with temperature.
Is α constant?
It changes slightly with temperature. The values here are typical for 20–100 °C.
Results are for learning and preliminary design. Check critical work against the relevant codes and a qualified engineer.