Pulling or pushing a bar creates stress — force per area. Hooke's law turns stress into strain through Young's modulus, and the yield strength gives a safety factor.
How to use this calculator
- Choose a material or enter your own modulus and yield strength.
- Enter the axial force and the cross-section area.
- Add the length to get the elongation.
Formula
σ = F / A, ε = σ / E, δ = ε × L, SF = fy / σWorked example
10 kN on a 50 mm² S275 steel bar: σ = 200 MPa, ε = 1000 µε, SF = 1.38.
Frequently asked questions
Does this work for compression?
For short members, yes. Long slender members can buckle well below yield — check buckling separately.
What safety factor should I use?
It depends on the code and the application; 1.5–2 against yield is common for static machine parts.
Results are for learning and preliminary design. Check critical work against the relevant codes and a qualified engineer.