Roads, ramps, drains and roofs use different ways of writing a slope. Convert any one of them to the others.
How to use this calculator
- Choose how you know the slope.
- Enter the value (or the rise and run).
- Read all the other forms.
Formula
grade = rise/run, % = 100 × grade, angle = atan(grade), ratio 1 : (1/grade)Worked example
A wheelchair ramp of 1 : 12 is 8.33 % or 4.76°.
Frequently asked questions
Is 100 % slope vertical?
No — 100 % is 45° (rise equals run). Vertical is infinite percent.
Typical drain fall?
Around 1 : 40 to 1 : 110 for 100 mm drains, depending on the code and flow.
Results are for learning and preliminary design. Check critical work against the relevant codes and a qualified engineer.